Compared to mechanical dock levelers, the Serco’s air bag dock leveler is safer and far easier to operate. To raise, simply push a button. There’s no back-wrenching pulling of chains, walking down the deck and, best of all, no springs or hold-down to repair or replace.
Servicing all of Louisiana including New Orleans, Metairie, Slidell, Belle Chasse, and Kenner
Serco Air Powered Edge-of-Dock Model
Design Highlights
- Push-button operation eliminates manual lifting
- Patented high volume, low pressure air bag lift system
- Lift system fully operational under extreme temperatures of -65 to 180 F (-53 to 82 C)
- Exclusive Lug Style Lip Hinge provides superior strength and extended life
- High Strength Steel Tread Plate (Ramp & Lip)
- Robotic Welding for improved strength, quality and consistency
- Operating Range is 5″ (127 mm) above to 5″ (127 mm) below dock
- Effective Working Range is 3” (72.6 mm) above to 3” (72.6 mm) below dock
- Lower Profile Design reduces interference with material handling equipment
- Beveled Lip Edge (11 degrees) provides smooth interface with trailers
- 15” (381 mm) Lip Standard (Optional 17” (432 mm) lip available for refrigerated trailers)
- Tire Laminated Bumpers mounted to steel bumper blocks – 16” (406 mm) projection
- Exclusive EZ-Hang installation system simplifies install
- Integral Maintenance / Service Strut
Serco Air Bag Dock Leveler Model AB
Design Highlights
- New! Exclusive SafeTFrame® Design
- High Volume, Low Pressure Lifting System
- Low Maintenance Design
- Exclusive HYDRA CAM™ Plus Automatic Lip Extension
- High Tensile Steel Lip, Deck & Beams
- Non-Metallic Push-button Control Panel (Non-Interlock Capable)
- 120V Single Phase Operation
- CLEAN FRAME® Design
- Structural Steel Safety Legs
- Full Operating Range Toe Guards
- Below-dock Endloading Capability
- 16” Lip Standard
- Grease Fittings
- Integral Maintenance Strut & Lip Support Latch
- Heavy-duty B410-14F Dock Bumpers
Kelley Air Powered Dock Leveler w/ Safety Barrier Lip
Provides the same proven air-powered performance, but incorporates a 5″ high, full-width, constant structural steel barrier, capable of withstanding a 10,000 lb. load at 4 mph.
Design Highlights
- New! Exclusive SafeTFrame® Design airDefense® Stump-out & Freefall Protection System with 60,000 lbs. Structural Dock Level Support Legs
- 5″ High Steel Safety Barrier Lip Design Rated to 10,000 lbs. at 4 MPH
- Lug Style Lip Hinge & Lambda Beam Structure
- Clean Pit Kit
- High Volume, Low Pressure Lifting System
- Low Maintenance Design
- Exclusive GRAVITY LIP™ Automatic Lip Extension
- Non-Metallic Push-button Control Panel (Non-Interlock Capable)
- 120V Single Phase Operation
- Full Operating Range Toe Guards
- Below-dock Endloading Capability
- 16″ Lip Standard
- Fixed Rear Hinge-No Pinch Points
- Integral Maintenance Strut & Lip Support Latch
- Integral Support Strut & Lip Lock
- Heavy-duty B410-14F Dock Bumpers
Kelley Air Powered Dock Leveler AFX
In addition to delivering safe, powered performance at a cost comparable to mechanical dock levelers, the Kelley Air Powered Dock Leveler features airDefense® — eliminating Stump-out and providing a measure of free-fall protection. It is also backed by the strongest warranty in the industry, with a lifetime lip hinge assembly warranty, 10-year structural* warranty, and a 5-year parts and labor warranty on the lifting system. All of which makes it the preferred choice of warehousing operations worldwide.
Design Highlights
- New! Exclusive SafeTFrame® Design airDefense® Stump-out & Freefall Protection System with 60,000 lbs. Structural Dock Level Support Legs
- Lug Style Lip Hinge & Lambda Beam Structure
- Clean Pit Kit
- High Volume, Low Pressure Lifting System
- Low Maintenance Design
- Exclusive GRAVITY LIP™
- Non-Metallic Push-button Control Panel (Non-Interlock Capable)
- 120V Single Phase Operation
- Full Operating Range Toe Guards
- Below-dock Endloading Capability
- 16″ Lip Standard
- Fixed Rear Hinge – No Pinch Points
- Integral Maintenance Strut & Lip Support Latch
- Heavy-duty B410-14F Dock Bumpers
Kelley Air Powered Dock Leveler AFX-C
It incorporates single push-button control with the standard, high-volume, low-pressure air activation system. Guaranteed with a 5-year activation system warranty.
Design Highlights
- New! Exclusive SafeTFrame® Design
- Semi-Automatic 60,000 lbs. Structural Dock Level Support Legs
- Lug Style Lip Hinge & Lambda Beam Structure
- High Volume, Low Pressure Lifting System
- Low Maintenance Design
- Exclusive GRAVITY LIP™ Automatic Lip Extension
- Non-Metallic Push-button Control Panel (Non-Interlock Capable)
- 120V Single Phase Operation
- Open Subframe Design
- Full Operating Range Toe Guards
- Below-dock Endloading Capability
- 16″ Lip Standard
- Fixed Rear Hinge – No Pinch Points
- Integral Maintenance Strut & Lip Support Latch
- Heavy-duty B410-14F Dock Bumpers
Kelley KA Air-Powered Edge-of-Dock Leveler
Design Highlights
- Push-button operation eliminates manual lifting
- Patented high volume, low pressure air bag lift system
- Lift system fully operational under extreme temperatures of -65 to 180 F (-53 to 82 C)
- Exclusive Lug Style Lip Hinge provides superior strength and extended life
- High Strength Steel Tread Plate (Ramp & Lip)
- Robotic Welding for improved strength, quality and consistency
- Operating Range is 5″ (127 mm) above to 5″ (127 mm) below dock
- Effective Working Range is 3” (72.6 mm) above to 3” (72.6 mm) below dock
- Lower Profile Design reduces interference with material handling equipment
- Beveled Lip Edge (11 degrees) provides smooth interface with trailers
- 15” (381 mm) Lip Standard (Optional 17” (432 mm) lip available for refrigerated trailers)
- Tire Laminated Bumpers mounted to steel bumper blocks – 16” (406 mm) projection
- Exclusive EZ-Hang installation system simplifies install
- Integral Maintenance / Service Strut
